Cimco Electronics Logo
 
Cimco Electronics, Inc.
P.O. Box 1338
McMurray, PA 15317 USA
Phone: 724.941.8001
Fax: 724.941.8002
Email: cimco@cimcoelectronics.com

  
Home     |     About Cimco     |     Background Information     |     Site Map     |     Products     |     FAQs     |     Feedback Form
 
Home > FAQs
 
Printer Icon Printer-friendly page

Cimco Electronics Inc BBB Business Review

Frequently Asked Questions

Why does Cimco use Type E Thermocouples?

  • They contain very small amounts of magnetic materials
  • Linear +/- 1ºC over 0-250ºC range
  • Two lead wires with very small space between them contained in one molded case
  • Not noticeably affected by noise from magnetic and electrical fields

Why does Cimco not recommend using RTDs?

  • They consist of two leads
  • The leads are separate wires
  • The separate wires collect a lot of noise from both magnetic and electrical fields
  • They failed numerous tests conducted by Cimco
  • Twisted pair does not improve performance noticeably

Why does Cimco not recommend using Thermistors?

  • Thermistors only cover temperatures up to 130ºC

Why does Cimco not recommend using Type K Thermocouples?

  • Made of magnetic material
  • Very susceptible to noise from magnetic and electrical fields

How do I change the setpoints on the Series 21?

If you have a question that is not listed on this page please email cimco@cimcoelectronics.com.
Thank you.

 
© Cimco Electronics, Inc. 2005


www cimcoelectronics.com